Catalogue data
Hot-rolled tubes for low-temperature service
ASTM A333 Gr. 1 / Gr. 6
Description and supply details
Delivery conditions
- Manufacturing process: hot-finished seamless tubes.
- Steel: A333 GR.1 – GR.6
- Lengths: tubes can be supplied in the following lengths:
- commercial lengths: as specified by the standard;
- fixed lengths: on request, with length tolerances as specified by the standard.
- Ends: tubes are supplied with plain ends.
- Tests and inspections: all tubes undergo the tests required by the standard; hydrostatic testing or an equivalent non-destructive test.
- Certificates: an inspection certificate is issued according to the manufacturing standard.
- Marking: according to the requirements of the standard.
- Surfaces and coatings: tubes are normally supplied in the bare condition. On request, the surface can be protected with fluid-film oil or an external protective synthetic paint.
- Packaging: tubes are normally packed in round bundles with a mass not exceeding 2000 kg., tied with wire rod at the ends. Special packaging is available on request.
Technical documentation
Technical tables
Table 01
HOT-ROLLED NON-ALLOY STEEL PIPES FOR LOW-TEMPERATURE SERVICE ASTM A333 GR. 1 GR. 6
30 / 30 Rows
Scroll horizontally to view all columns.
| DIAMETER DN | DIAMETER INC | DIAMETER mm | WALL THICKNESS INC | WALL THICKNESS mm | LINEAR WEIGHT lb/ft | LINEAR WEIGHT Kg/mt | SCHEDULE | SCHEDULE |
|---|---|---|---|---|---|---|---|---|
| 1/8” | 0,401 | 10,2 | 0,068 | 1,73 | 0,24 | 0,361 | STD | 40 |
| 1/8” | 0,401 | 10,2 | 0,095 | 2,41 | 0,31 | 0,463 | XS | 80 |
| 1/4” | 0,54 | 13,7 | 0,088 | 2,24 | 0,42 | 0,622 | STD | 40 |
| 1/4” | 0,54 | 13,7 | 0,119 | 3,02 | 0,52 | 0,78 | XS | 80 |
| 3/8” | 0,673 | 17,1 | 0,091 | 2,31 | 0,57 | 0,848 | STD | 40 |
| 3/8” | 0,673 | 17,1 | 0,126 | 3,2 | 0,74 | 1,103 | XS | 80 |
| 1/2” | 0,84 | 21,3 | 0,109 | 2,77 | 0,85 | 1,27 | STD | 40 |
| 1/2” | 0,84 | 21,3 | 0,147 | 3,73 | 1,09 | 1,62 | XS | 80 |
| 1/2” | 0,84 | 21,3 | 0,188 | 4,78 | 1,3 | 1,94 | // | 160 |
| 3/4” | 1,05 | 26,7 | 0,113 | 2,87 | 1,13 | 1,68 | STD | 40 |
| 3/4” | 1,05 | 26,7 | 0,154 | 3,91 | 1,47 | 2,19 | XS | 80 |
| 3/4” | 1,05 | 26,7 | 0,219 | 5,56 | 1,94 | 2,89 | // | 160 |
| 1” | 1,315 | 33,4 | 0,133 | 3,38 | 1,68 | 2,5 | STD | 40 |
| 1” | 1,315 | 33,4 | 0,179 | 4,55 | 2,17 | 3,24 | XS | 80 |
| 1” | 1,315 | 33,4 | 0,25 | 6,35 | 2,84 | 4,24 | // | 160 |
| 1.1/4” | 1,66 | 42,2 | 0,14 | 3,56 | 2,27 | 3,39 | STD | 40 |
| 1.1/4” | 1,66 | 42,2 | 0,191 | 4,85 | 3 | 4,47 | XS | 80 |
| 1.1/2” | 1,9 | 48,3 | 0,145 | 3,68 | 2,72 | 4,05 | STD | 40 |
| 1.1/2” | 1,9 | 48,3 | 0,2 | 5,08 | 3,63 | 5,41 | XS | 80 |
| 1.1/2” | 1,9 | 48,3 | 0,281 | 7,14 | 4,86 | 7,25 | // | 160 |
| 2” | 2,375 | 60,3 | 0,154 | 3,91 | 3,65 | 5,44 | STD | 40 |
| 2” | 2,375 | 60,3 | 0,218 | 5,54 | 5,02 | 7,48 | XS | 80 |
| 2.1/2” | 2,875 | 73 | 0,203 | 5,16 | 5,79 | 8,63 | STD | 40 |
| 2.1/2” | 2,875 | 73 | 0,276 | 7,01 | 7,66 | 11,41 | XS | 80 |
| 3” | 3,5 | 88,9 | 0,156 | 3,96 | 5,57 | 8,29 | // | // |
| 3” | 3,5 | 88,9 | 0,216 | 5,49 | 7,58 | 11,29 | STD | 40 |
| 3” | 3,5 | 88,9 | 0,3 | 7,62 | 10,25 | 15,27 | XS | 80 |
| 3.1/2” | 4 | 101,6 | 0,226 | 5,74 | 9,11 | 13,57 | STD | 40 |
| 4” | 4,5 | 114,3 | 0,156 | 3,96 | 7,24 | 10,79 | // | // |
| 4” | 4,5 | 114,3 | 0,237 | 6,02 | 10,79 | 16,08 | STD | 40 |
No matching rows
Show original table +
Original technical sheets
HOT-ROLLED NON-ALLOY STEEL PIPES FOR LOW-TEMPERATURE SERVICE ASTM A333 GR. 1 GR. 6
Values and units follow the original technical sheet. Confirm the applicable requirements and availability in the quotation.
Back to tube catalogueYOUR NEXT PROJECT
Let’s shape
your next supply.
A technical specification. A real requirement. Let’s start here.
Request a quote