Product datasheets
Products, specifications and steel grades.
Technical specifications for pipes, beams, profiles, merchant bars and structural steel grades.
Seamless Steel Pipes
Seamless steel pipes for industrial pipework and engineering duties, specified to the product standard suited to the application.
EN 10216 / EN 10297-1 / ASTM A106/A106M / API 5LPipes and tubesAPI 5L Steel Line Pipe
API 5L seamless or welded steel line pipe for oil and gas transportation, specified by grade and product specification level.
API 5LPipes and tubesASTM A106 Grade B Seamless Carbon Steel Pipe
ASTM A106 Grade B seamless carbon steel pipe for high-temperature industrial service, with minimum properties stated under ASTM SI requirements.
ASTM A106/A106M / ASME B36.10MPipes and tubesASTM A333 Grade 6 Low-Temperature Steel Pipe
ASTM A333 Grade 6 carbon steel pipe for low-temperature service and duties requiring notch toughness, with the specified manufacturing route and testing.
ASTM A333/A333MPipes and tubesMechanical Steel Tubes
Mechanical steel tubes for machined parts and engineering duties, selected by product standard, wall thickness and delivery condition.
EN 10297-1 / EN 10305-1 / EN 10305-2Pipes and tubesStructural Steel Hollow Sections
Structural steel hollow sections for construction and fabricated assemblies, cold-formed welded to EN 10219 or hot-finished to EN 10210.
EN 10219 / EN 10210Pipes and tubesCarbon Steel Heat Exchanger Tubes
Carbon steel heat exchanger and condenser tubes to ASTM A179 for seamless manufacture or ASTM A214 for electric-resistance welding.
ASTM A179/A179M / ASTM A214/A214MPipes and tubesSteel Gas Pipes
Carbon steel gas pipes specified by diameter, wall series, finish and end type.
EN 10255 / EN 10226-1Pipes and tubesSteel Electrical Conduit Tubes
Rigid steel conduit tubes for cable protection and routing in industrial installations.
UNI 7683 / UNI 7684 / EN IEC 61386-21Pipes and tubesWelded Steel Pipes
Welded steel pipes made from strip or plate, with a longitudinal or spiral seam and a standard selected for the application.
EN 10217 / EN 10219 / EN 10255 / API 5LPipes and tubesEN 10255 Steel Pipes
EN 10255 S195T non-alloy steel pipes suitable for welding and threading, with seamless or welded manufacture.
EN 10255 / EN 10226-1 / EN 10240Pipes and tubesEN 10217 Welded Pressure Pipes
EN 10217 welded pressure pipes with the standard part and grade selected for the service conditions.
EN 10217 / EN 10217-1 / EN 10217-2 / EN 10217-3Pipes and tubesEN 10219 Structural Hollow Sections
EN 10219 cold-formed welded structural hollow sections in circular, square or rectangular shapes.
EN 10219-1 / EN 10219-2 / EN 10210BeamsIPE Steel Beams
Parallel-flange IPE beams with EN 10365 dimensions, EN 10034 tolerances and structural grades for steelwork.
EN 10365 / EN 10034 / EN 10025-2BeamsHEA Steel Beams
Light-series wide-flange HEA beams, with dimensions, tolerances and steel grades to define in the enquiry.
EN 10365 / EN 10034 / EN 10025-2BeamsHEB Steel Beams
Standard-series wide-flange HEB beams for columns, structural frames and industrial supports.
EN 10365 / EN 10034 / EN 10025-2BeamsHEM Steel Beams
Heavy-series wide-flange HEM beams for heavily loaded columns and industrial frames.
EN 10365 / EN 10034 / EN 10025-2Profiles and barsHot-Rolled Steel Angle Sections
Hot-rolled equal-leg and unequal-leg angles with EN 10056-1 dimensions and EN 10056-2 tolerances.
EN 10056-1 / EN 10056-2 / EN 10025-2Profiles and barsHot-Rolled Commercial Steel Profiles
Hot-rolled commercial steel profiles, including UPN, UPE and equal-flange tees, for fabrication and construction.
EN 10365 / EN 10055 / EN 10025-2Profiles and barsHot-Rolled Steel Merchant Bars
Solid steel merchant bars in flat, square and round sections, with dimensional standards for each shape.
EN 10058 / EN 10059 / EN 10060 / EN 10025-2Steel gradesS275 Structural Steel to EN 10025-2
S275 steel to EN 10025-2: JR, J0 and J2 qualities, thickness-dependent strength and Charpy requirements.
EN 10025-2Steel gradesS355 Structural Steel to EN 10025-2
S355 steel to EN 10025-2: JR, J0 and J2 qualities, strength ranges and impact requirements.
EN 10025-2FlangesFlanges for industrial piping
Types and materials of flanges for industrial piping, with designations and information to include in an enquiry.
UNI EN 1092-1No matching products. Try another search.
YOUR NEXT PROJECT
Let’s shape
your next supply.
A technical specification. A real requirement. Let’s start here.
Request a quote